14
B063
Removing the expansion vessel
1.
Loosen nuts “K1” and remove the gas pipe (FIG. 1.50);
2. Loosen nut “L1” (FIG. 1.51);
3. Remove back nut “M1” (FIG. 1.52);
4. Remove the expansion vessel (FIG. 1.53).
Removing the pressure gauge
1.
Remove the U-clip “J1” and remove the pressure gauge
coupling (FIG. 1.48);
2. Push the pressure gauge through the control panel from
the rear (FIG. 1.49).
FIG. 1.48
FIG. 1.50
J1
FIG. 1.49
K1
L1
FIG. 1.51
FIG. 1.52
FIG. 1.53
K1
M1
34.eps
27.eps
77.eps
57.eps
58.eps
59.eps