Filter
Top Products
H200/H200HF Diagnostic and History Screens provide the
water treatment operator with a wealth of information.
Diagnostic Screens
• Days since last regeneration
• Total volume treated since last regeneration
• Reserve history for the current day and
previous six-days
• Usage history by the hour for each of the
last 63 days
• Maximum ow rate and hour it occurred
• Maximum ow rate per unit by hour and
day it occurred
• Total volume through the unit since it was
installed
All Diagnostic History screens are resettable
with the History Reset sequence while in the
Diagnostics1 screen. Holding the Set Clock
and Regen buttons for >3 seconds initiates a
totalizer or history reset.
DIAGNOSTIC 1
Automatically Toggles
Automatically Toggles
Diagnostic 4
DIAGNOSTIC 2
DIAGNOSTIC 3
DIAGNOSTIC 4
DIAGNOSTIC 4-B
Page 20 WS2H Control Valve Manual
Diagnostic Screens
All Diagnostic History screens are resettable
with the History Reset sequence while in the
Diagnostics1 screen. Holding the Set Clock
and Regen buttons for > 3 seconds initiates a
totalizer or history reset.
continuned on Page 21
Accessed by pressing UP and DOWN
simultaneously for >3 seconds.
DIAGNOSTICS 1
Days since the last regeneration.
DIAGNOSTICS 2
Gallons or Liters x1000 since the last
regeneration.
DIAGNOSTICS 3
Reserve history. This screen only appears if valve
is set to calculate Reserve in System Setup 7.
Use arrows to select a day.
0 = Today
1 = Yesterday
6 = 6 days ago (max.)
Reserve Value
DIAGNOSTICS 4
History of volume used.
Use arrows to select a day.
0 = Today
1 = Yesterday
63 = 63 days ago (max.)
REGEN will display if a
regeneration occurred that day.
Gallons Used
Simultaneously press
UP and DOWN.
DIAGNOSTICS 4-B
Hourly history of volume use. Use
the UP and DOWN arrow to select
the hours of the day from screen 4.
Volume used within the selected hour
Automatically Toggles
Returns to normal operation after 5 minutes.
4