Filter
Top Products
H125 SPECIFICATIONS
H125 H125 H125 H125 H125 H125 H125
Model # 32-10 48 64 96 128 160 192
Factory Regeneration
Settings
Backwash Minutes 8 8 8 8 8 8 8
Gallons 18 18 34 34 42 60 60
Brine/Rinse Minutes 60 60 68 68 68 68 68
Gallons 19.2 22.2 43.5 47.7 71.1 89.1 113
Backwash Minutes 8 8 8 8 8 8 8
Gallons 18 18 34 34 42 60 60
Fast Rinse Minutes 4 4 4 4 4 4 4
Gallons 9 9 17 17 21 30 30
Fill Minutes 6:32 9:53 13:14 19:56 26:38 33:20 40:02
Gallons 3.2 4.7 6.5 9.8 13.2 16.6 20
Total Regeneration Gallons* 66 71 134 142 190 256 283
Refill LBS of salt Lbs. Lbs. Lbs. Lbs. Lbs. Lbs. Lbs.
Low Salt 6 9 12 18 24 30 36
Medium Salt 10 15 20 30 40 50 60
High Salt 15 22.5 30 45 60 75 90
Capacity Grains Grains Grains Grains Grains Grains Grains
Low Salt 19,000 28,500 38,000 57,000 76,000 95,000 114,000
Medium Salt 28,000 42,000 56,000 84,000 112,000 140,000 168,000
High Salt 32,000 48,000 64,000 96,000 128,000 160,000 192,000
Service Flow Rates GPM GPM GPM GPM GPM GPM GPM
Continuous @ 15 psi 22 19 25 24 25 27 26
Peak @ 25 psi 31 28 34 33 34 35 34
Flint Under bed (lbs.) 14 14 40 40 45 50 75
High Capacity Resin (cu.ft.) 1 1.5 2 3 4 5 6
Resin Tank Size 10x44 10x54 13x54 14x65 16x65 18x65 18x65
Recommended Brine Tank 18x40 18x40 18x40 18x40 24x41 24x50 24x50
Brine Line Size 3/8” 3/8" 3/8" 3/8" 3/8" 1/2" 1/2"
DLFC (gpm) 2.2 2.2 4.2 4.2 5.3 7.5 7.5
BLFC (gpm) 0.5 0.5 0.5 0.5 0.5 0.5 0.5
Injector Size D-Red E-White G-Yellow
H-Green I-Orange J- Lt. Blue K- Lt. Green
Injector Draw Rate @ 50 psi 0.22 0.27 0.46 0.46 0.6 0.7 0.7
Injector Slow Rinse @ 50 psi 0.32 0.37 0.64 0.71 1.1 1.4 1.8
H125 Specifications
* Calculations are based on factory medium salt setting @ 50 psi
73-363
\\file02\users$\bkoenig\Marketing\Web site\Specs\73-363H125SPECSHEETUPDATED120307.xls
Updated 12-03-2007
LBRY