STEP 1 CS –
STEP 2 CS – Meter Size. or
STEP 3CS – or
• Factory Setting is OFF
Step 1CS
CYCLE SEQUENCE
Anytime cycle sequence is modied, softener set-up will revert to
manufacturer setting and must be reprogrammed as desired.
Step 2CS
1.25
SET
Step 3CS
OFF
AUX VALVE CONTROL
SET
REGENERANT
DRAW-DN
BRINE RECLAIM
Brine Reclaim:
Programming needed for Brine Recovery:
start time / duration / salt setting - 10 lbs./ft
3
Water Pressure H125-32-10 H125-48 H125-64
35 PSI
45 PSI
55 PSI
65 PSI
start time / duration / salt setting - 10 lbs./ft
3
Water Pressure H125-96 H125-128 H125-160 H125-192
35 PSI
45 PSI
55 PSI
65 PSI