2
INTRODUCTION
Read the installation instructions before installing the water heater. Read the user-instructions before lighting the water
heater. If these instructions are not followed carefully, this may lead to explosion and/or fire and can cause material
damages and/or physical harm.
Installation and commissioning should be carried out by a registered installer. The type of gas and standard values
which the water heater (from factory) is set on, are stated on the type plate.
The BFM-models fall under the instrument category; C13/C33. These water heaters are provided with an ignition system.
A. O. SMITH DOES NOT ACCEPT ANY RESPONSIBILITY FOR GUARANTEE, SERVICE PROVISION AND/OR PRODUCT
LIABILITY IN CASE OF UNAUTHORISED PRODUCT MODIFICATION OR REPAIRS.