Filter
Top Products
Instruction manual BFC 61
gis
Confirm with .
5. The lines showing switch-on/off times are replaced
by the text
DELETE BLOCK?
. See the figure.
Confirm with .
(or use to cancel)
The switching period has been deleted. You will return
now to the week program menu. The cursor points to
the first programmed period.
6. Scroll with to
START OPERATION
.
Confirm with .
The week program is active.
11.9 Extra period
Use an extra period when you either want to have the
appliance switch on and off for a certain period, either
without modifying the active week program, or without
taking the appliance out of the OFF mode (frost
protection active).
If the appliance is running under an "extra period",
then this is indicated in the display with the text
EXTRA
.
If the water temperature becomes too low during the
extra period (11.10 "Programming an extra period"),
the appliance will run through the heating
cycle (9.3 "The appliance's heating cycle") and fall
back into the extra period.
The same settings can be made for an extra period as
for a week program (11.6 "Changing the appliance's
standard week program") period.
11.10 Programming an extra period
1. Call up the menu for entering an extra period via:
2. :
EXTRA PERIOD
Confirm with .
The display show the settings for the extra period.
Setting the switch-on time
1. Use and to set the day. In the example this is
SU
.
Confirm with .
The cursor moves to the hour digits, which flash.
2. Use and to set the switch-on hour to the
desired value. In the example, this is
08.
Confirm with .
The cursor moves to the minute digits, which flash.
Note
Because the switch-off time can never be earlier
than the switch-on time, the switch-off time setting is
automatically adjusted with the switch-on time.
3. Use and to set the minutes. In the example,
this is
15
.
Confirm with .
The cursor moves to the hour digits of the switch-
off period.
DAY TIME Tset
ON !SU 18:00 75ÉC P
OFF SU 22:00
ON MO 00:00 65ÉC P
OFF MO 23:59
....................
....................
OFF SA 23:59
INSERT
DELETE
START OPERATION
DAY TIME Tset
ON ! DELETE
OFF BLOCK?
ON MO 00:00 65ÉC P
DAY TIME Tset
ON »SU 08:15 75ÉC P
OFF SU 12:45
ON MO 00:00 65ÉC P
OFF MO 23:59
....................
....................
OFF SA 23:59
INSERT
DELETE
START OPERATION
EXTRA
10:00 Monday 76ÉC
MO 11:15 Tset 75ÉC
PERIOD ACTIVATED
MENU
ON
^ WEEK PROGRAM
ȻEXTRA PERIOD
ON SU»00:00
OFF SU 00:59
Tset 65ÉC
PUMP ON START
ON SU 08»00
OFF SU 08:00
Tset 65ÉC
PUMP ON START
ON SU 08:15
OFF SU»08:15
Tset 65ÉC
PUMP ON START