Filter
Top Products
6
TYPICAL INSTALLATION
FIGURE 2.
* MIXING VALVE USAGE ** FOR CLARITY, METAL DRAIN PAN NOT SHOWN
This appliance has been design certifi ed as complying with American
National Standard/CSA Standard ANSI Z21.10.1 • CSA 4. 1 for water
heaters and is considered suitable for:
Water (Potable) Heating: All models are considered suitable for
water (potable) heating.
HOTTER WATER CAN SCALD:
Water heaters are intended to produce hot water. Water heated to a
temperature which will satisfy space heating, clothes washing, dish
washing, and other sanitizing needs can scald and permanently injure
you upon contact. Some people are more likely to be permanently
injured by hot water than others. These include the elderly, children,
the infi rm, or physically/mentally handicapped. If anyone using hot
water in your home fi ts into one of these groups or if there is a local
code or state law requiring a certain temperature water at the hot
water tap, then you must take special precautions. In addition to
using the lowest possible temperature setting that satisfi es your
hot water needs, a means such as a *Mixing Valve should be used
at the hot water taps used by these people or at the water heater.
Mixing valves are available at plumbing supply or hardware stores.
Consult a Qualifi ed Installer or Service Agency. Follow mixing valve
manufacturer’s instructions for installation of the valves. Before
changing the factory setting on the thermostat, read the “Temperature
Regulation” section in this manual, see Figures 36 and 37.