Filter
Top Products
page
6
➠
➒ CRANK MECHANISM MAINTENANCE (EXCLUDING XR)
7.1 - Remove the head (See ∂ ),
● remove the ceramic pistons (See ❻),
● discharge oil (See ❼).
7.2 - Remove the rear cover.
7.3 - Remove the con-rod sliding the one piece-rod
whilst removing the shaft.
7.4 - For re-assembly: Invert above operations. Re-
place the oil seals!
Keep to torque ratings as shown an page 8.
❿ CRANK MECHANISM MAINTENANCE XR SERIES
8.1 - Remove the head (See ∂ ),
● remove the ceramic pistons (See ❻),
● discharge oil (See ❼).
8.2 - Remove the rear cover.
8.3 - Unscrew con rod bolts, remove the con-rod cap,
sliding the shaft out, mark the two sides of the con-rod
for future reference.
8.4 -For re-assembly: Invert above operations. Replace
the oil seals!
Keep to torque ratings as shown an page 8.
① ÷ ⑨ GEARBOX ASSEMBLY XT - XR
❿
Lubricate the
O-Ring!
B
efore applying adhesive,
degrease the surfaces .
➠
➒
11
1
2
"PIK" sealing
adhesive