Filter
Top Products
Installation Instructions
Fig. 7d
Fig. 7a
Fig. 7e
MOUNTING
HOLES
4-1/4"
(108mm)
1-3/16"
(46mm)
5"
(126mm)
3-3/8"
(85mm)
3-3/16"
(33mm)
20"
(508mm)
1. Electronics Mixing Valve
and Enclosure
2. Supply Hoses
3. Mounting Kit
4. Installations instructions
All American Standard Faucets Are Water Tested At Our Factory.
Some Residual Water May Remain In The Faucet During Shipping.
Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years. To
ensure that your installation proceeds smoothly--please read these instructions carefully before you
begin.
UNPACKING
1. Remove the Mixer and loose items from the carton. The picture below shows the Mixer and
all loose items after the carton has been opened.
1
TOOLS REQUIRED; Fig. 2
Fig. 2
Fig. 1
1 Channel Locks
2 Adjustable Wrench
3 Phillips Screwdriver
4 Flat Blade Screwdriver
5 Electric Drill & 1/4" Drill Bit
6 Tape Measure
1
2
3
4
5
6
Roughing-in Dimensions
10'
Thermostatic Mixing valve
• 3/8" stainless steel compression flex
hoses, 20" length
• meets ASSE 1016
• anti-scald protection
1 42
3
Installation Instructions
Installation Instructions
(In Toronto Area only: 1-905-3061093)
SELECTRONIC™
Thermostatic Mixing Valve
Certified to comply with ASME A112.18.1M
© 2005 American Standard
M968808
To learn more about American Standard Faucets visit our website at: www.us.amstd.com or U.S.
customer's e-mail us at: faucetsupport@amstd.com
For Parts, Service, Warranty or other Assistance,
please call
1-800-442-1902 (In Canada: 1-800-387-0369)
NOTE TO INSTALLER: Please give this manual to the customer after installation.
(In Toronto Area only: 1-905-3061093)
605XTMV
Specifications
Installation
Adjust Temperature
Service
Replacement Parts
FAQ, s
1
2
3
3
4
5