Filter
Top Products
Unscrew LIFT ROD NUT (1) from LIFT ROD GUIDE (2).
Make sure SEAL (3) is seated into ESCUTCHEON
of LIFT ROD GUIDE (2).
Drop LIFT ROD GUIDE (2) into rear hole of bidet and
from below secure with ROD GUIDE NUT (1).
WATER SUPPLY CONNECTIONS
Connect water supplies to FITTING (1) with 1/2" IPS
FLEXIBLE SUPPLIES (2) or 3/8" O.D. BULL-NOSE RISERS (3).
Use adjustable wrench to tighten connections.
Do not over tighten. Be careful not to kink copper supply
when bending. Use tubing cutter to cut to proper length.
NOTE: FLEXIBLE SUPPLIES ARE NOT INCLUDED AND HAVE TO BE
PURCHASED SEPARATELY.
Cold
Hot
FERRULE
COUPLING NUT
3
1
2
.3&7
LIFT ROD GUIDE INSTALLATION
SPRAY INSTALLATION
Assemble SPRAY BODY (1) to BIDET.
Using putty, seal underside of SPRAY
BODY FLANGE (2) and secure with
NUT (3).
Thread SPRAY CAP (9) onto SPRAY BODY (1).
Thread SPRAY HOSE (4) with SEAL
WASHER (5) to SPRAY BODY (1).
Connect other end of HOSE (4) with
SEAL WASHER (6) to bottom outlet
NIPPLE (7) of the TRANSFER VALVE (8).
Insert SEAL (1) into ADAPTER (2) and tighten ADAPTER (2)
to side of TRANSFER VALVE (3)
Install SEAL (4) into coupling nut of TEE (5) and
tighten connection to ADAPTER (2)
Connect HOSE COUPLING NUTS (6) to Hot
and Cold valve bodies and securely tighten.
TEE AND HOSE CONNECTION
Front
3
1
2
4
5
6
6
1
3
2
4
PUTTY
6
2
7
8
1
3
5
9