Filter
Top Products
8
When the water tank is full, the unit will switch off automatically and the
indicator [4] will illuminate.
At this time, please empty the water tank as follows:
• Slowly slide out the tank squarely using the recess at the
bottom of the water tank as shown.
• Holding the handle inside the container, pull it slightly up and
then pull out gently for easy removal.
• Once emptied, gently push the water tank back into place
checking the indicator light is off.
If the tank is not in the correct position the indicator light will
stay on.
Continuous drainage
Optional: For the continuous drainage facility please refer to the following:
1. Remove the water cap from the tube beneath the unit.
* Please keep the rubber plug safely for future use.
2. Fit a hose with an inside diameter of 11 mm over the drainage spout.
3. Ensure the water will always drain away freely and the hose will remain in place.
4. If you no longer need to drain continuously, take off the water tube and replace
the rubber plug. The water will then drain into the container.
Note: In very cold weather conditions, precautions should be taken to prevent the
drainage hose from freezing.
GB
EMPTYING THE WATER TANK