Filter
Top Products
5
REMOTE CONTROL
LCD display:
Auto mode
Sleep
Cool
Dehumidify
Fan mode
Temperature
Fan mode
Fan speed indicator
Auto (fan, vane control)
Airflow direction
Clock
Order of timer operation
Timer
Timer on
Timer off
Temperature set
Using the remote control
The remote control signal has a range of up to 8 m. Point the remote
control at the receiver in the interior unit.
A beep confirms that the remote control signal has been received.
Replacing the batteries
• remove the cover.
• replace the AAA batteries, pay attention to polarity:
+ to +
and
- to -
.
• install the cover.
CLK button - To set the present time.
RST button - To reset all values to factory standard.
Control lights on the unit
• When the air conditioner is in operation, the
RUN light
will be on.
• If the TIMER has been set (either on or off or both), the TIMER light will be on.
RUN TIMER
Note: The symbols on your AHW 162 remote control may differ from the ones
used in this manual.