Amcor 12KE-410 Air Conditioner User Manual


 
7
GB
When the water container is full, the compressor and
the ventilator stop functioning, LED [4] will lit.
Switch off the unit and remove the plug from the
mains.
Place the water tray flat on the floor under the drain.
Remove the drain knob.
Remove the rubber plug and fill the water tray then replace the plug to stop
the water flow. Empty the tray and repeat this process until all water has been
removed.
Replace the rubber plug and the drain knob, plug the unit in and switch on. The
LED [4] should now be out.