Filter
Top Products
13
Power supply:
- Insert the plug of the air conditioner into a standard three prong outlet.
2. COOLING OPERATION
- Connect the power and press the “ ON/OFF ” button.
- Press the “ MODE” button several times until the cooling indicator light comes on.
- Press the “ TEMP SETTING” buttons▲or ▼ to select your desired room temperature. (60-89)
- Press the ″FAN SPEED″ button to choose the fan speed: AutoHighMediumLow.
3. DEHUMIDIFYING OPERATION
- Connect the power and press the “ ON/OFF ” button.
- Press the “MODE” button several times until the dehumidifying indicator light comes on.
- Press the “TEMP SETTING” buttons▲or ▼ to select your desired room temperature. (60-89)
- The fan will often run at a fixed low speed at this setting.
- Keep windows and doors closed for the best dehumidifying effect.
4. HEATING OPERATION (not available for cooling-only type air conditioner)
- Connect the power and press the “ ON/OFF ” button.
- Press the “MODE” button several times until the heating indicator light comes on.
- Press the “TEMP SETTING” button▲or▼to select your desired room temperature. (60-89)
- Press the “FAN SPEED” button to choose the fan speed: AutoHighMediumLow.
- The fan will delay to be off for a few minutes when the AUH has been off.
5. FAN OPERATION
- Connect the power and press the “ ON/OFF ” button.
- Press the “MODE” button several times until the fan indicator light comes on.
- Press the “FAN SPEED” button to choose the fan speed: HighMediumLow.
6. TIMER OPERATION
Setting the on timer:
- Press the “TIMER ON” button or “TIMER” button when the air conditioner is off . Press the “TEMP SETTING”
button▲or▼to select the time you need turn on the unit .
- The starting time is adjustable from 01 to 24.
- The operation paned window will display “ ON ”or the timer-on indicate light.
Setting the off timer:
- Press the “TIMER OFF” button when the air conditioner is on. Press the “TEMP SETTING” button▲or▼
to select the time you need turn off the unit.
- The turning off time is adjustable from 01 to 24.
- The operation paned window will display “ OFF ”or the timer-off indicate light.
7. WATER PUMP DRAINAGE
-
Connect the water pump drain hose to the unit before operating. When the water level of the internal water
tank reaches a predetermined level, the water pump will be activated and drain the condensed water
outside through the connected drain hose. The maximum delivery lift is 3.0m(10 feet).(Under this
condition, ensure the rubber stopper is attached to continuous drainage plug at the bottom of the unit.