Filter
Top Products
3Mt Tattle-Tapet Security Strips
3M Library Security System
5-2
E 3M 1999 September
5.1 Print Media Protection —
3Mt
tt
t Tattle-Tapet
tt
t Security Strips: B1
Description/Characteristics
The 3Mt B1 Security Strip is a security strip which
may be secured inside the spine of a book.
Security strips on protected items must be properly
desensitized so the items can be carried through the
detection system without causing an alarm.
Security Strip Application
The 3M B1 security strips should be applied and
stored away from areas which are readily accessible to
patrons.
Security strips should be applied only to surfaces
which are flat, clean, dry and at room temperature. For
maximum adhesion, minimize touching the adhesive
surface of the security strips.
Installation in Books
1. Remove the liner from the security strip.
2. Place1/4inch[6mm]oftheB1securitystripon
the tip of the bayonet.
3. Open the book so the book cover separates from
the binding.