Filter
Top Products
17
Spare Parts/Service Information
Recommended Spare Parts
A set of spare parts that will periodically require replacement due to normal wear is supplied with the taping heads.
The set includes the following which should be reordered when used to keep the taping heads in production:
AccuGlide™ 2+ Stainless Steel 3 Inch Upper Taping Head
Qty. Ref. No. Part Number Description
4 10529-22 78-8134-2353-6 Stud – Mounting
1 10531-10 78-8134-2370-0 Spring – Upper Extension
1 10533-2 78-8137-0512-2 Knife – 89 mm/3.5 Inch
2 10533-12 78-8134-2344-5 Spring – Cutter
1 – 78-8076-4726-4 Tool – Tape Threading
AccuGlide™ 2+ Stainless Steel 3 Inch Lower Taping Head
Qty. Ref. No. Part Number Description
1 10533-2 78-8137-0512-2 Knife – 89 mm/3.5 Inch
2 10533-12 78-8134-2344-5 Spring – Cutter
4 10535-22 78-8134-2353-6 Stud - Mounting
1 10536-10 78-8134-2388-2 Spring – Lower Extension
1 – 78-8076-4726-4 Tool – Tape Threading
In addition to the above set of spare parts supplied with the taping head, it is suggested that the following spare
parts be maintained which will require replacement under normal wear of the taping head.
Qty. Ref. No. Part Number Description
1 10530-15 78-8057-6181-0 Roller – Applying
1 10531/10536-5 78-8057-6180-2 Roller – Buffing
1 10533-18 78-8134-2345-2 Spring – Torsion
Replacement Parts and Service
Refer to the first page of this instruction manual “Replacement Parts and Service Information."