Filter
Top Products
ii
AccuGlide
™
, Scotch
™
, and 3M-Matic
™
are Trademarks of 3M, St. Paul, Minnesota 55144-1000
AccuGlide
™
2+
Stainless Steel 3 Inch Upper and Lower Taping Heads consist of:
Qty. Part Name
1 Taping Head Assembly
1 Tape Drum and Bracket Assembly
1 Hardware and Spare Parts Kit
1 Threading Tool
Taping Head Contents
Equipment Warranty and Limited Remedy: THE FOLLOWING WARRANTY IS MADE IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE AND ANY IMPLIED WARRANTY ARISING OUT
OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE:
3M sells its AccuGlide™ 2+ Stainles Steel 3 Inch Upper and Lower Taping Heads, Type 10500 with the following
warranty:
1. The Taping Head blade, springs and rollers will be free from defects in material and manufacture for ninety
(90) days after delivery.
2. All other Taping Head parts will be free from defects in material and manufacture for three (3) years after
delivery.
If any part is defective within this warranty period, your exclusive remedy and 3M’s and seller’s sole obligation shall be,
at 3M’s option, to repair or replace the part. 3M must receive actual notice of any alleged defect within a reasonable time
after it is discovered, but in no event shall 3M have any obligation under this warranty unless it receives such notice within
five (5) business days after the expiration of the warranty period. All notices required hereunder shall be given to 3M solely
through the 3M-Matic™ Helpline (800-328-1390). To be entitled to repair or replacement as provided under this warranty,
the part must be returned as directed by 3M to its factory or other authorized service station designated by 3M. If 3M
is unable to repair or replace the part within a reasonable time after receipt thereof, 3M, at its option, will replace the
equipment or refund the purchase price. 3M shall have no obligation to provide or pay for the labor required to remove
any part or equipment or to install the repaired or replacement part or equipment. 3M shall have no obligation to repair
or replace those parts failing due to normal wear, inadequate or improper maintenance, inadequate cleaning, non-
lubrication, improper operating environment, improper utilities, operator error or misuse, alteration or modification,
mishandling, lack of reasonable care, or due to any accidental cause.
Limitation of Liability: Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising
from this 3M equipment, whether direct, indirect, special, incidental, or consequential, regardless of the legal theory
asserted, including breach of warranty, breach of contract, negligence, or strict liability.
Note: The foregoing Equipment Warranty and Limited Remedy and Limitation of Liability may be changed only by a written
agreement signed by authorized representatives of 3M and seller.