3D Connexion 7318 Sewing Machine User Manual


 
17
q
w
Seam guides on the needle plate
The seam guides on the needle plate help you to
measure seam allowance.
The numbers indicate the distance between the
center needle position and the seam guide.
q Seam guides
Turning a square corner
The cornering guide helps you maintain a 5/8˝
(1.6 cm) seam allowance when sewing a corner.
When the fabric edge facing you lines up with the
cornering guide as illustrated, stop stitching and
lower the needle into the fabric by turning the
handwheel toward you.
Raise the presser foot and pivot the fabric so the
edge of the fabric will align with the 5/8˝ (1.6 cm)
seam guide.
Lower the presser foot and start stitching in the
new direction.
w Cornering guide
Number 15 20 4/8 5/8 6/8
Spacing (cm) 1.5 2.0 1.3 1.6 1.9
Spacing (inch) 1/2 5/8 3/4