Filter
Top Products
14
q
w
“+”
“–”
Adjusting stretch stitch balance
If the stretch stitch patterns are uneven when you
sew on a particular fabric, correct them by turning
the stitch length dial.
If the patterns are drawn out, correct them by
setting the dial to the “–” side.
If the patterns are compressed, correct them by
setting the dial to the “+” side.
Stitch Width Dial
Turn the stitch width dial to set the desired stitch
width number at the setting mark.
The higher the number, the wider the stitch
q Stitch width dial
w Setting mark
CAUTION:
Do not turn the stitch width dial while the needle
is in the fabric, otherwise the needle may bend
or break.
Variable needle position
The needle drop position of the straight stitches
can be moved between the center (5) and left (0)
with the stitch width dial.