11
Operating Sequence
Before the first wash, we recommend that you run a
cotton cycle at 95°C, without any laundry in the
machine, to remove any manufacturing residue from the
drum and tub.
Pour 1/2 a measure of detergent into the main wash
compartment of the dispenser drawer and start the
machine.
1. Load the laundry
Open the door by pulling the door handle outwards.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
2. Measure out the detergent
and the fabric softener
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required and pour
it into the main wash compartment .
If you have selected the
PREWASH option, pour detergent
into the compartment marked .
If required, pour fabric softener into the compartment
marked (the amount used must not exceed the
“MAX” mark in the drawer). Close the drawer gently.
3. Switch the machine on
To switch the machine on, press the ON/OFF button: the
mains-on light comes on. The display will show three
flashing dashes or ablinking zero.
4. Select the required programme
Turn the programme selector dial to the desired
position: the display will show the duration of the
selected programme.
The lights corresponding to the different phases making
up the selected programme light on.
5. Select the SPIN speed or
RINSE
HOLD
option
Depress the spin speed button to choose the required
speed or RINSE HOLD option : the corresponding
light comes on.
