Before setting the controls
@Make sure clock is set to correct
time of day. (See “Setting the
clock” on page 10.)
l Make sure the oven door is
completely closed.
Setting the controls
NOTE:
Displays shown are from single/
upper ovens. Command pads shown are
from double ovens. In some cases, lower
oven displays and single oven command
pads may look different than those shown.
NOTE:
On double ovens, you cannot run a
Self-Cleaning cycle in both ovens at the
same time. Also, if you are setting a Self-
Cleaning cycle for the lower oven the control
will not let you program any other function in
the upper oven.
To start cleaning immediately:
1.
2. Set cleaning time (optional).
If you want a Self-Cleaning cycle longer
or shorter than 3’12 hours, use the Hour
pad to set the desired cleaning time.
Press the “up” (A) or “down” (V) pad(s)
until a time between 2l/~-4l/z hours
shows on the display.
l
Use 2l/2
hours for light soil.
l
Use
3’/2-4l/2
hours for moderate to
heavy soil.
34
