16
Seat Assembly
34. Press four 3/4” Round Inner Caps (40) into the ends
of the Pad Tubes (48).
Insert the Pad Tubes (48) into the indicated holes in
the Leg Lever (49) and the Press Seat Frame (52).
Slide Foam Pads (47) onto the ends of both Pad
Tubes.
35. Insert a 1/4” x 2 1/2” Carriage Bolt (12) into the center
hole in a Seat Plate (42). Attach the Seat Plate to the
Press Backrest (89) with two 1/4” x 3/4” Screws (13).
Insert the 1/4” x 2 1/2” Carriage Bolt (12) into the indi-
cated hole in the Press Frame Upright (59) and
secure it with a 1/4” Flat Washer (11) and a 1/4”
Nylon Locknut (16).
Secure the other end of the Press Backrest (89) with a
1/4” x 2 1/2” Screw (10) and a 1/4” Flat Washer (11).
33. Locate and open the parts bag labelled “SEAT
ASSEMBLY.”
Insert a 1/4” x 2” Carriage Bolt (85) into the center
hole in a Seat Plate (42). Attach the Seat Plate to a
Seat (51) with two 1/4” x 3/4” Screws (13).
Insert the 1/4” x 2” Carriage Bolt (85) into the indicat-
ed hole in the Press Seat Frame (52) and secure it
with a 1/4” Flat Washer (11) and a 1/4” Nylon Locknut
(16). Secure the other end of the Seat (51) with a 1/4”
x 2” Bolt (86) and a 1/4” Flat Washer.
51
52
11
11
16
86
13
42
85
35
10
11
11
16
59
13
42
12
89
33
34
40
49
52
47
47
40
48
