58. Press two 3/4Ó Round Inner Caps (78) into each Pad
Tube (28).
Insert a Pad Tube (28) into the Rear Seat Frame (16).
Slide a Foam Pad (29) onto each end of the Pad
Tube.
Insert the other Pad Tube (28) into the Leg Lever
(15). Slide a Foam Pad (29) onto each end of the
Pad Tube.
59. Attach the Large Backrest (19) to the Leg Press
Upright (4) with two 1/4Ó x 2 1/2Ó Machine Screws
(64) and two 1/4Ó Washers (37).
60. Insert a 1/4Ó x 2 1/2Ó Carriage Bolt (60) through the
center hole in a Seat Plate (41). Attach the Seat Plate
to the Seat (17) with two 1/4Ó x 1/2Ó Screws (59).
Insert the 1/4Ó x 2 1/2Ó Carriage Bolt (60) through the
indicated hole in the Front Seat Frame (8). Tighten a
1/4Ó Nylon Locknut (44) with a 1/4Ó Washer (37) onto
the Carriage Bolt.
Attach the other end of the Seat (17) to the Front
Seat Frame (8) with a 1/4Ó Washer (37) and a 1/4Ó x
2 1/2Ó Machine Screw (64).
58
59
60
21
37
4
19
64
17
59
60
8
37
44
41
64
16
15
78
29
28
78
29
57. Insert a 1/4Ó x 2Ó Carriage Bolt (61) through the cen-
ter hole in a Seat Plate (41). Attach the Seat Plate to
the Seat (17) with two 1/4Ó x 1/2Ó Screws (59).
Insert the 1/4Ó x 2Ó Carriage Bolt (61) through the indi-
cated hole in the Rear Seat Frame (16). Tighten a
1/4Ó Nylon Locknut (44) with a 1/4Ó Washer (37) onto
the Carriage Bolt.
Attach the other end of the Seat (17) to the Rear Seat
Frame (16) with a 1/4Ó Washer (37) and a 1/4Ó x 2Ó
Machine Screw (63).
57
44
63
17
16
41
61
59
37
