— 5 —
OPERATION
WARNING: HOT OIL AND PARTS CAN CAUSE BURNS. USE CARE WHEN OPERATING,
CLEANING AND SERVICING THE FRYER.
CONTROLS — MODELS VF1/VMF1 and VF2/VMF2 (Fig's. 1 & 2)
Power Switch — Turns electric power to the fryer on or off.
ON Indicator Light — (Red) Indicates electric power to the fryer is on.
HEAT Indicator Light — (Amber) Indicates heating elements are supplying heat.
Thermostat — Controls temperature of oil in tank. Temperature range is 0-400°F.
Fry/Melt Switch — (Optional - Not shown.) Position on MELT when solid shortening is being
melted; then position on FRY for normal operation.
Automatic Basket — Set to desired frying cycle time. At end of set time, baskets will automatically
Lift Timers (Optional) raise. Timer range is from 0 to 15 minutes.
Ball Pull Rod — (Models VF1/VMF1 only.) Raises elements from tank when pulled straight
out. Lowers elements into tank when pushed in.
VF1/VMF1
Fig. 1
VF2/VMF2
Fig. 2
PL-40540-1
Power Switch
On Indicator
Light
Thermostat
Heat Indicator
Light
Automatic Basket Lift Timers (optional)
PL-40539-1
Power Switch
On Indicator
Light
Thermostat
Heat Indicator
Light
Ball Pull Rod
Automatic Basket Lift Timers (optional)
