— 6 —
PL-40538-1
Fry/Melt
Switch
Heat Indicator
Light
High Limit Light
Temperature Controller
On Indicator Light
Power Switch
PL-40537-1
Ball Pull Rod
Fry/Melt
Switch
Heat Indicator
Light
Power Switch
High Limit Light
Temperature Controller
On Indicator Light
CONTROLS — MODELS VF1D/VMF1D and VF2D/VMF2D (Fig's. 3 and 4)
Power Switch — Turns electric power to the fryer on or off.
ON Indicator Light — (Red) Indicates electric power to the fryer is on.
HEAT Indicator Light — (Amber) Indicates heating elements are supplying heat.
High Limit Light — When ON, indicates that the oil temperature is higher than 400°F, or that
the heating elements are not covered with shortening, and the system
has shut down. Call your Vulcan-Hart authorized servicer.
Temperature Controller — Controls temperature of oil in tank. Temperature range is 0-375°F.
Fry/Melt Switch — Position on MELT when solid shortening is being melted; then position
on FRY for normal operation.
Ball Pull Rod — (Models VF1D/VMF1D only.) Raises elements from tank when pulled
straight out. Lowers elements into tank when pushed in.
VF2D/VMF2D
Fig. 4
ADDING LIQUID SHORTENING TO THE FRYER
Shortening should be between 1" and 2" above the top of the heating elements' surface.
Liquid shortening may be used in all fryers.
VF1D/VMF1D
Fig. 3
