21
English
SETTING UP YOUR TV
From the System Setup menu, you can add the satellites
that you wish to tune and configure detailed settings for
each one individually.
To add a satellite:
a Press and B / b to highlight Installation
icon.
b Press c and B / b to select Channel Tuning and
press OK.
c Press b to select Satellite Settings and press
OK.
d Press b to highlight a new line to add an another
satellite and press OK.
e Press b until the required satellite is displayed and
press OK.
To delete a satellite:
a In the Satellite Settings menu, press B / b to
select the satellite you want to delete.
b Press the RED button. A confirmation window will
appear.
c Press C / c to select Yes and press OK.
NOTE: It is not possible to delete position No.1.
To edit the satellite settings:
a In the Satellite Settings menu, press B to
highlight Switch Type.
b Press C / c to select None, ToneBurst, DiSEqC
2way, DiSEqC 4way or Single Cable as your
satellite switch type.
c Press b to highlight LNB Power and press C / c
to select On or Off.
To add a transponder:
a In the Satellite Settings menu, press B / b to
highlight the line you want to edit and press OK.
b Press the GREEN button. The Transponder
Settings screen will appear.
c Press B to highlight a new line.
d
Press
OK
.
e
Edit each parameter as required and press
OK
.
Satellite Settings
1 Astra 19.2E 1 1
2
3
4
Satellite Settings
Switch Type
LNB Power
None
On
No. Satellite
Dish
LNB
Done
Transponder : 1/120 (10729) MHz
Dish Type : Fixed
Lower LOF : 9750
Upper LOF : 10600
1 Astra 19.2E 11
Transponder Settings
Frequency
1 10743 H 22000 S
2 10773 H 22000 S
3 10788 V 22000 S
4 10817 V 22000 S
5 10832 H 22000 S
6 10847 V 22000 S
7 10861 H 22000 S
8 10876 V 22000 S
Polarisation Symbol Rate S/S2
Transponder Settings
Frequency
76 12640 H 22000 S
77 12662 H 22000 S
78 12669 V 22000 S
79 12692 H 22000 S
80 12699 V 22000 S
81 12721 H 22000 S
82 12728 V 22000 S
83
Polarisation Symbol Rate S/S2
83 0 H 0 S
83 1231 H 0 S2
