A SERVICE OF

logo

4 Replacement Procedures
4-26 Tecra A3/S2 Series Maintenance Manual
4.10 Bluetooth
Removing the Bluetooth
To remove a Bluetooth unit, follow the steps below.
1. Detach a FFC cable from motherboard.
2. Remove two black M2x3 screws.
3. Grasp the Bluetooth unit and remove it.
Figure 4-19 Removing the Bluetooth
Installing the Bluetooth
To install a Bluetooth unit, follow the steps below and refer to the figures in the preceding section.
1. Seat the Bluetooth module securing with two black M2x3 screws.
2. Connect the FFC cable to motherboard.