6-16
User's Manual
POWER
❖❖
❖❖
❖ Disable (button)
Click this button to invalidate the token. You cannot revalidate old tokens, but
you can use the same SD cards to create new tokens.
Supervisor password
To set a supervisor password, follow the steps below.
1. Click Start.
2. Click Run.
3. Enter the following: C:\Program Files\Toshiba\Windows
Utilities\SVPWTool\TOSPU.EXE
NOTE: If you set a supervisor password, some functions might be
restricted when a user logs on with the user password.
This utility lets you do the following:
❖❖
❖❖
❖ Register, delete or change the supervisor password.
❖❖
❖❖
❖ Create or invalidate a supervisor token
NOTE: This function in the TOSHIBA Password Utility lets you invali-
date only supervisor tokens or all tokens, including user and supervisor
tokens.
❖❖
❖❖
❖ Specify restrictions for general users.
Starting the computer by password
If you registered a password, there are two ways to start the computer:
❖❖
❖❖
❖ Insert a token before you turn on the computer. The computer will start
normally, without displaying a password prompt.
❖❖
❖❖
❖ Enter the password manually.
NOTE: The password is necessary only if the computer was shut down in
boot mode. It is not needed in Hibernation or Standby mode.
