Toshiba IK-HD3D Manual

next previous

Menus7. 2

s3ELECTTHEMENUTOCHANGETHESETTINGBYREFERRINGTOTHEITEMh5SINGTHE-ENUSv

s7HENTHE;-%.550=;-%.5$/7.=BUTTONSAREPUSHEDTHEh

” on the screen moves up and down.

Move the “

” to the item whose setting you wish to change.

SHUTTER (Electronic shutter)( 1 )

The electronic shutter has three modes; AUTO, MANUAL, SS(Synchro. Scan).

0RESSTHEh0AGEvBUTTONTOENTERTHE3HUTTER0AGE5SETHEh$ATA5P$OWNvBUTTONSTOSELECTTHE3HUTTER-ODE

MANUAL SSAUTO

AUTO : The exposure time is controlled automatically to obtain the video level set.

MANUAL : It is possible to select the exposure time from eleven speed settings; OFF (at 1/60s: 59.94Hz setting

and 1/50s: 50Hz setting), 1/100s, 1/125s, 1/250s, 1/500s, 1/1000s, 1/2000s, 1/3000s, 1/4000s,

1/5000s, 1/10000s.

SS : Shutter speed can be set by the horizontal scanning time (1H) unit.

Notes:

s)FTHESHUTTERSPEEDISINCREASEDTHESENSITIVITYISDECREASEDACCORDINGTOTHESPEED&LICKERMAYBELARGEUNDER

discharge lamp lighting such as ﬂuorescent tubes.

s)FAFASTMOVINGOBJECTISSHOTITSIMAGEMAYBEDISTORTEDORBLURRED(ORIZONTALLIGHTANDDARKSTRIPESMAY

appear on the screen under discharge lamp lighting such as ﬂuorescent tubes. A light and dark difference may

appear on the screen according to the light emitting timing of ﬂash or strobe. These phenomena are caused due

to rolling shutter system, not failures.

s7HENTHESHUTTERSPEEDISSETTOHIGHTHEHUEMAYCHANGEACCORDINGTOTHESHOOTINGCONDITIONSANDTHE

object.