⎯ 110 ⎯
6 F 2 S 0 8 5 7
• Enter the numerical value and press the
ENTER
key for each element.
• After setting all elements, press the
END
key to return to the "Protection element" menu.
O C
1/24
T1OC ( 0.00- 10.00): 0.00 s
T2OC ( 0.00- 10.00): 0.00 s
T3OC ( 0.00- 10.00): 0.00 s
1OCI ( 0.10- 5.00): 0.10 pu
2OCI ( 0.10- 5.00): 0.10 pu
3OCI ( 0.10- 5.00): 0.10 pu
T1OCI ( 0.05- 1.00): 0.50
T2OCI ( 0.05- 1.00): 0.50
T3OCI ( 0.05- 1.00): 0.50
1EF ( 0.10- 20.00): 0.10 pu
2EF ( 0.10- 20.00): 0.10 pu
3EF ( 0.10- 20.00): 0.10 pu
T1EF ( 0.00- 10.00): 0.00 s
T2EF ( 0.00- 10.00): 0.00 s
T3EF ( 0.00- 10.00): 0.00 s
1EFI ( 0.10- 5.00): 0.10 pu
2EFI ( 0.10- 5.00): 0.10 pu
3EFI ( 0.10- 5.00): 0.10 pu
T1EFI ( 0.05- 1.00): 0.50
T2EFI ( 0.05- 1.00): 0.50
T3EFI ( 0.05- 1.00): 0.50
3OC ( 0.10- 20.00): 0.10 pu
2OC ( 0.10- 20.00): 0.10 pu
1OC ( 0.10- 20.00): 0.10 pu
<THR>
•
Press 4 (= THR) to display the "THR" screen. The measuring elements and the timer used in
the thermal overload protection are set using this screen.
• Enter the numerical value and press the
ENTER
key for each element.
• After setting all elements, press the
END
key to return to the "Protection element" menu.
/7 THR 1/ 5
τ
(
0.
0
00):
k(
5-
.00
0
IB (
.5
2
4
0.
.5
nim
-
10
): 10
.05
-
50
):
5.0
Ip ( 0.
.0):
-
.
00
10
50
pu
0.
0
0
0.
pu
TA (
0):
-0
1
0
mni
<V/F>
•
Press 5 (= V/F) to display the “V/F” screen. The measuring elements and timers used in the
overexcitation protection are set using this screen.
• Enter the numerical value and press the
ENTER
key for each element.
• After setting all elements, press the
END
key to return to the “Protection element” menu.
