Setting up Device Settings 85
7) Administrator’s Password
If you want to change the administrator’s password used to log in functions from the TopAc-
cess, enter a new password. You can enter alphanumeric letters of 6 or more and 10 or less
for the administrator’s password. You cannot leave this field blank.
8) Confirm Password
Enter a new password that you entered in the “Administrator’s password” field.
Setting up the energy save
You can set the time to enter the Auto Clear, Auto Power Save and Auto Power Off mode.
1) Auto Clear
Select how long this equipment can remain inactive before the LCD of this equipment auto-
matically returns to the default display and settings.
2) Auto Power Save
Select how long this equipment can remain inactive before entering the power save mode.
3) Sleep/Auto Shut Off
Select how long this equipment can remain inactive before entering the sleep mode or auto
shut off mode.
Setting up the time and date
You can set the date, time, time zone, and date format.
1) Date/Time
To adjust the date, select year in the first field, select month in the second field, and enter
date in the third field.
To adjust the time, enter hour in the fourth field, and enter time in the fifth field.
2) Time Zone
Select the time zone where this equipment is located.
Setting up the Web general setting
You can set the session timer to automatically log out from the administrator mode.
1) Session Timer
Enter how long you want this equipment to preserve the session data of TopAccess. You
can enter any integer between 5 to 999.
1
2
3
1
2
1
