Introduction
Equipment Notes
iv Strata DK System Administrator Guide 5/00
Equipment Notes
♦ Most of the operations in this guide require a Liquid Crystal Display (LCD)
digital telephone at the System Administrator’s work station.
♦ Typically, use the station with [PDN] 10, 100, or 200 to perform the functions in
this guide. This guide assumes the Adminstrator’s telephone is connected to
station Port 000. If you wish, you can use a different [PDN] which must be
assigned by the system installer. In any case, the station is referred to as the
“Administrator station” throughout this guide. Ask your system installer which
station this is.
Organization
This guide is divided as follows:
♦ Chapter 1 – Setting System Parameters contains descriptions and procedures
for changing System Administrator-specific parameters. These parameters are
given in alphabetical order.
♦ Appendix A – Access Codes provides feature access code sequences which can
be stored onto SD buttons for one-touch feature access.
♦ Appendix B – Directories/Record provides blank directories for recording User
Names/Numbers and Speed Dial memos, and telephone locations and instructions
for displaying [DN], physical port, and logical port information.
