REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES
SECTION 100-816-600
MARCH 1993
-21-
IMPORTANT NOTE:
This program clears Call Forward memory for all stations, but does not reset the Call Forward
indication on the station (Call Forward LCD information and/or Call Forward button/LED). To
clear station Call Forward indications, system power must be turned OFF for five seconds, then
ON. Fixed Call Forward is not cleared by this program.
PROGRAM 92 (continued)
CALL FORWARD BACKUP RAM INITIALIZATION
ACTIONSTEP DISPLAY/PRINTOUT
1
>MODE PROGEnter Program Mode
At the >MODE prompt, enter P R O G CR.
2 P 92
P92
Enter Program Number 92
Press CR.
3 P92
P92 9
Enter 9.
4
P92
P92 9 03 N
Enter button/LED number 0 3.
5 P92
P92 9 03 N Y
Change LED 03 to "ON" by
entering Y.
7 Change LED 04 to "ON" by
entering Y.
8 Press CR.
Initialization complete.
6 P92
P92 9 03 N Y
Press SPACE.
04 N
P92
P92 9 03 N Y
04 N Y
P92
P92 9 03 N Y
P92
04 N Y
NOTE: If program data is not entered correctly,
CR
will
not respond. To retry, press
DELETE CR
at the same time
.
9 To exit this program, press # # CR.
