![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/f/1b/f1b12f77-55c9-4488-baaf-8bd1d73d954e/f1b12f77-55c9-4488-baaf-8bd1d73d954e-bg2.png)
Confromita' CE (Solo per Europa)
Questo prodotto rispetta le normative EMC e le Direttive sul Basso Voltaggio inclusi i suoi
emendamenti.
VORSICHT:
• Schallemission: unter 70dB (A) nach DIN 45635 (oder ISO 7779)
• Die für das Gerät Vorgesehene Steckdose muß in der Nähe des Gerätes und leicht zugänglich sein.
Copyright © 2006
by TOSHIBA TEC CORPORATION
ll Rights Reserved
570 Ohito, Izunokuni-shi, Shizuoka-ken, JAPAN
Centronics is a registered trademark of Centronics Data Computer Corp.
Microsoft is a registered trademark of Microsoft Corporation.
Windows is a trademark of Microsoft Corporation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
(for USA only)
Changes or modifications not expressly approved by manufacturer for compliance could void the
user’s authority to operate the equipment.
“This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.”
“Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel
brouilleur du Canada.”
(for CANADA only)
L’adattatore EA10953 AC deve essere utilizzato esclusivamente per le stampanti della serie B-SV4D.
Le stampanti della serie B-SV4D devono essere alimentate tramite l’adattatore EA10953 AC.
< For EU Only >
TOSHIBA TEC Europe Retail Information Systems S.A.
Rue de la Célidée 33 BE-1080 Brussels
Informazioni sul riciclo del prodotto:
Le seguenti informazioni riguardano gli stati membri EU:
Il simbolo con il bidone sbarrato indica il non poter smaltire questo prodotto come
rifiuto domestico.
L'accertamento che questo prodotto sia smaltito correttamente contribuirà ad
impedire le potenziali conseguenze negative per l'ambiente e la salute umana che
potrebbero essere causati, al contrario, dall'errato smaltimento dello stesso. Per
informazioni più dettagliate sulle modalita di resa e riciclaggio di questo prodotto
mettetevi in contatto con il fornitore da cui l'avete aquistato.