A SERVICE OF

logo

2. MAJOR UNIT REPLACEMENT EO18-33024
(Revision Date: Dec. 16, 2008)
2.9 Replacing the Cover Open Switch and Media Sensor (Lower)
2-20
5) Remove the Cover Open Switch (L) and Cover Open Switch (R) from the Base Cover.
6) Replace the Media Sensor (Lower) and Cover Open Switches (L) and (R) with a new one, then reassemble
in the reverse order of removal.
Cover Open Switch (L)
Cover Open Switch (R)
Connector
Base Cover
NOTE:
Pay attention to the following when reassembling the sensor.
Path the lead wires between the protrusions.
Do not get the lead wires into the gears.
Do not let the covers catch the lead wires.