AS/400 Print Solution — Operation 45
Print file script
Specify print file script below according to the printing style of a document to be printed
with an MFP.
Example:
The examples of commands for print file script are as follows:
Portrait + DUPLEX SHORT_EDGE + STAPLE TOP_LEFT:
CHGPRTF FILE (library name / spool file name) DUPLEX(*TUMBLE) CORNER-
STPL(*TOPLEFT)
Automatic drawer selection
In case of LT/A4, the orientation of the paper is reversed when "TOP_DOUBLE" and
"STAPLE" are selected together. Therefore the drawer in this case shall be selected as
follows:
LT/A4 (Portrait) + STAPLE TOP_DOUBLE:
DRAWER: LT-R/A4-R
LT/A4 (Landscape) + STAPLE TOP_DOUBLE:
DRAWER: LT/A4
Printing directions on the back side (DUPLEX)
The examples of printing directions on the back side of the paper in case of "DUPLEX"
are shown below.
Printing Style Attribute
ORIENTATION Portrait
Landscape
PAGRTT : *AUTO (Leave it default.)
Or select “0”
:90
STAPLE TOP_LEFT
TOP_RIGHT
LEFT_DOUBLE
TOP_DOUBLE
CORNERSTPL : *TOPLEFT
:*TOPRIGHT
: *BOTLEFT
: *BOTRIGHT
DUPLEX LONG_EDGE
SHORT_EDGE
DUPLEX : *YES
:*TUMBLE
Printing directions on the back
sides differ depending on the
orientation. See "Printing
directions on the back side
(DUPLEX)" on the next page.
DRAWER AUTO DRAWER : 1 (Leave it default.)
