34
Using the TV’s Features
Scrolling the TheaterWide
®
picture
(TheaterWide 2 and 3 only)
1. Press PIC SIZE to select the TheaterWide 2 or 3 mode.
2. Press MENU, and then press
or until the SETUP menu appears.
3. Press ▲ or ▼ to highlight PICTURE SCROLL.
4. Press
or to display the Scroll Adjustment mode.
Note:
You can scroll the picture in TheaterWide 2
and TheaterWide 3 only. The scroll amounts
are as follows:
• 480i/480p signal source:
Wide 1 : Not adjustable
Wide 2 : -10 to +20
Wide 3 : -10 to +10
5. Press ▲ or ▼ to adjust the vertical position of the picture.
• Normal (center) position
•To raise the picture, press ▲.
•To lower the picture, press ▼.
SCROLL ADJUSTMENT 0
: ADJUST
SCROLL ADJUSTMENT 0
: ADJUST
SCROLL ADJUSTMENT +20
: ADJUST
SCROLL ADJUSTMENT
–
10
: ADJUST
INPUT DISPLAY
Pic Size
Menu/Enter
Note:
If the remote control does not operate your TV,
press the “TV” button on the remote control
and try again.
TV
30A0121A_En_p31-40 5/26/06, 6:26 PM34
