A SERVICE OF

logo

8·34
CHASSIS
REMOVAL
Remove the cotter pin. (For E-03, 28, 33)
Loosen the axle nut.
Raise the rear wheel off the ground and support the motorcy-
cle with a jack or wooden block.
Remove the axle nut and draw out the rear axle.
Remove the rear wheel by disengaging the drive chain.
ICAUTION I
Do not operate the brake pedal while removing the
rear wheel.
Remove the collar
CD.
Remove the brake disc
(2).
Remove the collar @.
Loosen the rear sprocket mounting bolt and separate the rear
sprocket ® from its mounting drum @.
Draw out the rear sprocket mounting drum @ from the wheel
hub.
Remove the rear sprocket mounting drum retainer @.