A SERVICE OF

logo

Open as PDF
next previous
5
Fitness Bike
XBR25
1. Attach the Rear Stabilizer (7) to the Main Frame (1) with the four Hex Head Bolts (65) and four Flat Washers
(84). Tighten completely with the wrench (112).
2. Attach the Seat Back (5) to the Seat Carriage (4) of the main frame. Slide a Hex Head Bolt (67) and a Hex
Head Bolt (142) through each side, then attach a Flat Washer (77) and a Nyloc Nut (89) to each bolt. Tighten
the bolts just enough so there is no side to side play, but freedom of movement front to back. Use the wrenches
provided (112 & 132).
HARDWARE
STEP 1: Rear Stabilizer & Seat Back
#77.3/8” x 19 x 1.5T
Flat Washer
(4 pcs)
#84. 3/8” x 25 x 2T
Flat Washer
(4 pcs)
#89.3/8” x 7T
Nyloc Nut
(4 pcs)
#65.3/8” x 2-1/4”
Hex Head Bolt
(4 pcs)
#67. 3/8” x 4”
Hex Head Bolt
(2 pcs)
#142.3/8” x 4-1/4”
Hex Head Bolt
(2 pcs)