Configuring KIRK Wireless Server 600v3 83
KIRK Wireless Server 600v3 Installation and Configuration Guide
5 In the IP address field, type the new IP address.
The new IP address is now the default address when accessing the KIRK Wireless Server
600v3.
6 In the Network mask field, type a new network mask.
Contact your system administrator for more information.
7 In the Default gateway field, type the IP address of the default gateway.
Contact your system administrator for more information.
8 Click OK.
9 Click Reset (under Administration menu) to save your configuration.
7.5.3 Configuring Ethernet Link
1 Under the Configuration menu, click ETH0, and then click Link.
Figure 37 Adm. Page: Configuration/ETH0/Link page
2 From the Link list, select auto, and then click OK.
When selecting auto, the link speed will be determined by the network switch.
3 Click Reset (under Administration menu) to save your configuration.
