5
Setting up the remote commander
Getting Started
Getting Started
Step 2
Step 2
Setting up the remote commander
Inserting the batteries
Insert two R6 (size AA) batteries
by matching the + and – on the
batteries to the diagram inside the
battery compartment.
Insert the negative (–) end first,
then push in and down until the
positive (+) end clicks into
position.
Using the remote commander
You can use this remote
commander to operate this VCR
and a Sony TV. Buttons on the
remote commander marked with a
dot (
•
) can be used to operate your
Sony TV. If the TV does not have
the symbol near the remote
sensor, this remote commander
will not operate the TV.
g
123
456
789
0
Remote sensor
/
To operate Set / to
the VCR
and point at the remote sensor on the VCR
a Sony TV
and point at the remote sensor on the TV
continued
