Getting Started
25
Setting the clock
filename[01GB04GET-NP0.fm] model name1[SLV-SF990G(ENG)] model name2[]
[3-062-324-
11
(1)]
Tips
• To change the digits while setting, press CURSOR
<
to return to the item to be changed,
and select the digits using CURSOR
M
/
m
.
• If you set AUTO ADJUST to ON, the Auto Clock Set function is activated whenever the
VCR is turned off. The time is adjusted automatically by making reference to the time signal
from the station whose programme position is displayed in the “CLOCK PROGRAM” row.
If you do not need the Auto Clock Set function, select OFF.
Note
• The menu disappears automatically if you don’t proceed for more than a few minutes.
4
Press CURSOR
M
/
m
to highlight ON,
then press OK.
5
Press CURSOR
m
to highlight CLOCK
PROGRAM, then press OK.
6
Press CURSOR
M
/
m
until the
programme position of the station that
carries the time signal appears.
If the VCR does not receive the time
signal from any station, AUTO ADJUST
returns to OFF automatically.
7
Press MENU to exit the menu.
OK
CURSOR
SET :
SELECT :
OK
MENUEXIT :
CLOCK
ON
1 AAB
AUTO ADJUST
CLOCK PROGRAM
MANUAL ADJUST
.8 9 . 20 00 THU 8 : 0 0
12
OK
CURSOR
CONFIRM :
SELECT :
OK
MENUEXIT :
CLOCK
AUTO ADJUST
CLOCK PROGRAM
MANUAL ADJUST
.2000 THU 8:00
8.9
1 AAB
21
CURSOR
CONFIRM :
SELECT :
OK
MENUEXIT :
CLOCK
AUTO ADJUST
CLOCK PROGRAM
MANUAL ADJUST
.2000 THU 8:00
8.9
2 CDE
21
MENU
