30
Adding track marks automatically
(Auto Time Stamp)
Use this feature to add track marks automatically at specified
intervals when recording through the analog input connector or a
microphone.
1 While the recorder is recording or in recording pause, press
MENU.
2 Press <SELECT, until “TIME MARK” flashes in the
display, and then press ENTER.
3 Press <SELECT, until the desired time interval flashes in the
display, and then press ENTER.
Select one of the following intervals:
To cancel Auto Time Stamp
Select “OFF” in step 3, and then press ENTER, or stop recording.
Display Time
OFF —
5min. ON Approx. 5 min.
10min. ON Approx. 10 min.
15min. ON Approx. 15 min.
<SELECT,
MENU/ENTER
