II-18
Details on [Effect] Menu
Chapter 2 Video Switching
[DME Wipe Modify] Menu
Display the [DME Wipe Modify] menu by pressing the V1 knob while [DME Wipe Adjust] is selected.
The crop function is not available in the following cases.
• When the 1701 (Mosaic) or 1702 (Defocus) effect pattern is selected
• When the KEY next transition selection button is selected
Menu item Description Knob Parameter Meaning Setting range Reference
page
Positioner Turn the positioner for adjusting the
DME wipe position on/off.
Tip
The patterns for which the positioner
can be used are as follows.
1031, 1201 to 1208, 1221 to 1224, and
1251
V4 Pos Turns positioner
on/off
Off, On II-13
Positioner
Adjust
Adjust the DME wipe position.
If you want to reset the setting value to
“0.00,” press the V4 knob.
V2 Pos H Adjusts position
in horizontal
direction
–200.00 to +200.00
(0.00) (A negative
value moves the
pattern left, and a
positive value moves
it right)
II-13
V3 Pos V Adjusts position
in vertical
direction
–200.00 to +200.00
(0.00) (A negative
value moves the
pattern down, and a
positive value moves
it up)
V4 Center Resets setting
value to “0”
–
Size You can adjust the size of the
sub-screen when you use the 1201 to
1208 (Frame In/Out), 1221 to 1224
(Frame In/Out), and 1251 (PinP) DME
wipe patterns.
Notes on setting values
Param: Set the enlarge/reduce ratio
as a percentage. The 100.00
setting is equal to the size of the
input image.
V3 Size Turns size
adjustment on/off
Off, On II-13
V4 Param Adjusts size 0.00 to 200.00
(100.00)
Crop H Turn the crop function on/off, and set
the left and right positions used when
cropping unnecessary portions of an
image.
V2 Crop Turns crop on/off Off, On II-13
V3 Left Position for
cutting left
portion of image
–100.00 to +100.00
V4 Right Position for
cutting right
portion of image
–100.00 to +100.00
Crop V Set the action performed when a
transition is executed, and set the top
and bottom positions used when
cropping unnecessary portions of an
image.
V2 Trans Action when
transition
executed
Cut, Last5%, Linear II-13
V3 Top Position for
cutting top
portion of image
–100.00 to +100.00
V4 Bottom Position for
cutting bottom
portion of image
–100.00 to +100.00
Tip
