A SERVICE OF

logo

STEP 1: AS
SIGN A TRIGGER BUTTON
NOTE: This step is
Card 4E.
NOT required for the CF Mag Stripe Reader
NOTE: For the CF RFID Reader-Scan Card 6M/6P, multiple
trigger buttons need to be assigned. Please refer to
RFID card manual for instructions.
1. Tap Start | Settings | Buttons.
your
2. From the Button list, tap to select a button to trigger your
scanner. For best ergonomics, the left or right button is
recommended. In the drop-down menu, select SocketScan.
Tap ok.
Scan folder | SocketScan.
STEP 2: START SOCKETSCAN
1. Tap Start | Programs | Socket
2. A SocketScan icon
should appear at the bottom of the
Today screen indicating that no data collection device has
been inserted.
CHAPTER 6: SOCKETSCAN FOR PLUG-INS 41