129530
•
After every drying clean the lter, located in the
inner part of the door.
•
Lift the lter lid (Fig.).
•
Pull your ngers over the lter to remove bers
and threads lining. Replace the lter cover (it must
snap in place at the bottom).
•
If necessary, also clean the lter housing and door
sealing.
If the lter is clogged in such way that it needs
washing, pull it out from its bed (Fig.), wash it under
hot water and dry. Be sure that the replaced lter
snaps safely to its position, and only then close the
lter lid.
If the lter is not regularly cleaned, the
airow is obstructed, which causes longer
drying time and danger of overheating.
Empty the container and occasionally
clean the water condensation device.
Emptying the water containere
Empty the container after every drying procedure:
pull the container out, pull out the draining nozzle,
pour out the water and replace the container.
Water from condenser tank is not
drinkable! If ltered it may be used for
ironing.
21
Cleaning and maintenance
Cleaning the lter
Cleaning the
condensation dryer
