Shure SW 6000 Manual

A SERVICE OF

next previous

DIS Digital Conference System User Manual

Installation Manual SW 6000 ver 6.2.docx

15

4.2 ‘Advanced’ Installation (multiple PC’s)

The following installation procedure describes

how to install the SW 6000 Software on multiple

PC’s in designs as described in the section

‘Installation with Multiple PC’s’.

Preparations before installation 4.2.1

Before you start the installation of the SW 6000

Software Package you must ensure that the

following preparations have been done:

• Ensure that you have LAN TCP/IP

connection at the PC’s. Assign a

permanent or automatic IP address

• If you use more than one PC in the

system Windows 7/Server 2012 please

note that there are some built in

Windows errors, which have to be

corrected before running SW 6000. See

sub-section ‘4.2.2 Windows Corrections’.

• Install touch screen driver if using touch

screen for the CUA

• Disable the firewall as default. If it is

necessary to enable the firewall please

follow the instructions in the sections

‘4.2.3 Additional Firewall settings’ and

‘4.2.4 Message Queuing settings’.

Windows Corrections 4.2.2

If you use more than one PC in the system and

are using Windows 7 or Server 2008/12 please

note that there are some built in Windows

errors, which have to be corrected before

running SW 6000. The next sections show the

corrections to be made

1.

Enable MSDTC to allow the network

transaction. To do this, follow these steps:

a.

Click Start.

b.

In the Search programs and files text box,

type

dcomcnfg.exe

, and then click

Enter

.

c.

In the Component Services window,

expand

Component Services

, expand

Computers

, expand My Computer,

and

then expand

Distributed Transaction

Coordinator.

d.

Right-click Local DTC and click

Properties.

e.

In the Local DTC Properties dialog box,

click on Security tab.

f.

Click to select the Network DTC Access

check box.

g.

Under the Transaction Manager

Communication group, click to select the

Allow Inbound

check box. To allow the

distributed transaction to run on this

computer from a remote computer.

h.

Under the Transaction Manager

Communication group, click to select the

Allow Outbound

check box. To allow the

distributed transaction to run on a remote

computer from this computer.

i.

Under the Transaction Manager

Communication group, click to select the

No Authentication Required option.

j.

In the Local DTC Properties dialog box,

click

OK

.

2

Configure Windows Firewall to include the

MSDTC program as an exception. To do this,

follow these steps:

a.

Click Start.

b.

In the Search programs and files text box,

type

Firewall.cpl

, and then click Enter

c.

In Windows Firewall dialog box, click

Allow a program or feature through

Windows Firewall.

d.

In the Allowed Programs dialog box, click

A

llow another Program…

. If button is not

enabled then click

Change Settings

first

e.

In the Add a Program dialog box, click the

Browse button, and then locate the

Msdtc.exe file. By default, the file is stored

in the <Installation

drive>:

\Windows\System32

folder.

f.

In the Add a Program dialog box, click

Add.

g.

In the Allowed Programs dialog box,

Select

Microsoft Distributed Transact

ion

Coordinator Serv

ice

and check all check

box’s

h.

In the Allowed Programs dialog box, click

OK.