19
DDoowwnnmmiixxiinngg iinnttoo 22 ffrroonntt cchhaannnneellss
To cancel the 2-CH downmix mode, select the
desired surround mode.
When play is stopped or interrupted,etc., the 2-CH
downmix mode is not canceled even though “ST”
and the DTS or Dolby Digital indicators go off.
DTS and Dolby Digital multi-channel program
material will be heard automatically in the 2-CH
downmix mode if headphones are plugged in and
the SPEAKER button is set to off. However, only
the DTS or Dolby Digital indicator will be
illuminated. Unplugging the headphones and setting
the SPEAKER button to on will restore the previous
mode.
Allows the multi-channel DTS or Dolby Digital signal
to be reproduced through only two speakers or
through headphones.
When playing the DTS or Dolby Digital program
sources, press the STEREO button.
“ST” and the DTS or Dolby Digital indicators light
up, indicating that the 2-CH downmix mode, and
then the 5 discrete channels (front L, center, front R,
rear L and rear R) are mixed down into 2 front
channels.
EENNGGLLIISSHH
Each time this button is pressed in the Dolby Digital
or Dolby Pro Logic mode, the delay time changes in
regular intervals.
Each time this button is pressed in the Dolby
Virtual mode, the delay mode changes as follows;
NARROW: Relatively long distance from the
prime
listening position to front speakers.
WIDE: Relatively short distance.
If the delay time disappears, start again from step 13.
