To listen with the headphones.
9
Press the SPEAKER button to off.
When listening to a DTS or Dolby Digital program
source, if the headphones are plugged in and the
SPEAKER button is set to off, the 2-CH downmix
mode will be selected automatically. (For details,
refer to “Downmixing into 2 front channels”on page
18.)
EENNGGLLIISSHH
12
WWhheenn CCDD oorr VVIIDDEEOO11~~33 iiss sseelleecctteedd aass aann
iinnppuutt ssoouurrccee
Select the digital or analog input
connected as desired.
4
To playback the program sources in surround sound,
refer to “ENJOYING SURROUND SOUND” on
page 15.
Each time this button is pressed, the corresponding
input is selected as follows ;
Optical 1 Coaxial 1 Coaxial 2
No display(ANALOG)
To listen to a DTS or Dolby Digital program source
in the 2-CH downmix mode(the stereo mode), the
corresponding digital input must be selected. (For
details, refer to “Downmixing into 2 front channels”
on page 18.)
Notes :
When the selected optical or coaxial digital input is
not connected, the selected digital input display
flickers, indicating the lack of sound. (Refer to
“ENJOYING SURROUND SOUND” on page 15.)
The sound from the component connected to the
selected digital input can be heard regardless of the
selected input source.
Adjust the (overall) volume.
6
Operate the selected component for
playback.
5
Then “CINEMA EQ ON” is displayed.
Press it again to cancel, the “CINEMA EQ OFF”
is displayed.
To compensate for edgy or shrill movie
sound tracks.
7
“MUTE” will flicker.
To resume the previous sound level, press it again.
To mute the sound.
8
