A SERVICE OF

logo

MK 4 | 15
If a problem occurs ...
ENFRITNLRUZH ES DE
Sound
distorted
Wrong input sensi-
tivity setting or
wrong pre-amplifi-
cation of the sub-
sequent amplifier
Reduce the input sensitiv-
ity or pre-amplifiaction of
the subsequent device so
that sufficient gain
reserve remains.
Wind influence Use a suitable windshield
(see page 10).
Plosives Use a suitable popshield
(see page 10).
Structure-borne
noise transmission
Use a suitable shock
mount (see page 7).
Sound
muffled,
spatial
Pick-up pattern has
been ignored
Check if the microphone is
spoken into from the cor-
rect side. Make sure that
the Sennheiser logo or the
slanted front of the sound
inlet basket faces your
body.
Problem Possible cause Possible solution